The CYBERTEK CP1000A AC Clamp is used for alternating current testing. The current under test can reach up to an effective value of 1000A, peak value of 2000A, with a bandwidth of up to 100 kHz.
The CYBERTEK CP1000A clamp diameter is approximately 54mm and with its standard BNC output connector the CP1000A can be connected to oscilloscope of any brand.
It has switchable ranges and easily can test smaller current. The additional optional accessories BNC to banana plug allows the connection t0 digital multimeters or equipment with banana input connectors.. The Cybertek CP1000A can be widely used in the testing of motor drives, inverters, power switches etc..
CYBERTEK CP1000A AC Clamp Specification:
| Range | 10A | 100A | 1000A | |
| Continuous Current | 10Arms | 100Arms | 1000Arms | |
| Peak Value Current | 30Apk | 300Apk | 2000pk | |
| Current Transfer Ratio | 100mV/A | 10mV/A | 1mV/A | |
| Bandwidth | 20Hz~100kHz | |||
| Rising time | ≤3.5μs | |||
| Accuracy | 0.1A…1A | ≤2% | ||
| 1A…10A | ≤1% | |||
| 10A…100A | ≤0.5% | |||
| 100A…1000A | ≤0.3% | |||
| Relationship between position and accuracy |
0.2%(Typical) | |||
| Clamp diameter | 54mm | |||
| Output Port | BNC | |||
| Output Cable length | 2m | |||
| Safety Level | 600V CATIII | |||
| Operating Temperature/ Humidity |
-10℃~55℃,80% or less | |||
| Storing Temperature/ Humidity |
-40℃~70℃,80% or less | |||
| Operating Altitude | 2000m | |||
| Size (Length* Width* Height) |
216*115*45mm | |||
| Weight | 695g | |||
