EXTECH AUT20M 20A Current Tester

 

 

Extech logo

Extech AUT20M Automotive Current Tester-Mini Fuse, 20-Amp.

Automotive Current Tester Mini Fuse, 20-Amp
Check up to 20 amps without breaking the circuit. Mini-blade connectors plug into the fuse block. It has a measuring range of 20 amps/48 VDC (10 seconds, max) with 10 mA resolution and (±2 percent + 2 digits) accuracy. Results are displayed on a 3.5-digit LCD.

Features

  • AUT20M Automotive Current Tester-Mini Fuse, 20-Amp
  • (2-Percent + 2 Digits) Accuracy
  • Measuring range: 20A/48VDC (10 seconds max)
  • 10mA resolution
  • 29.5″ (75cm) connector cabler

CE   1 Year

SKU: EXTECH AUT20M Categories: , Tags: ,

EXTECH AUT20M 20A Current Tester

Features

• Large digit LCD display

• For use on standard ATC blade size fuse circuits (AUT20) or mini‐blade size fuse circuits (AUT20M)

• Measuring range to 20A/48VDC (10 sec. test time max.)

AUT 20M

Operating Instructions

1. With the vehicle ignition OFF, remove the fuse from the circuit to be tested and set it aside. 2. Insert the meter’s fuse blades (3) into the jack from where the fuse was removed. 3. Insert the removed fuse into the meter’s fuse jack (4). 4. Press the meter’s On/Off button (2) 5. Operate the circuit under test for up to 10 seconds only; the LCD (1) will display the measured current. 6. When finished press the On/Off button to turn off the tester. 7. WARNING! The Fuse blade may become hot during testing. Allow to cool before removing. Do not test > 10 seconds.

BATTERY INSTALLATION 1. To replace the battery, remove the screw from the back of the unit and remove the cover. 2. Insert one 12V ‘A23G’ battery (observe polarity). 3. Replace the battery cover NOTE: If the meter does not work properly, check the battery to ensure that it’s fresh and properly inserted. Battery Safety Never dispose of batteries in a fire; batteries may explode or leak.

Weight .2 kg

Related Products