EXTECH AUT35 Current Tester

EXTECH AUT35 Universal 30A Current Tester

 

Extech logo

 

EXTECH AUT35 Universal 30A Current Tester

Check up to 30 amps without breaking the circuit. Mini and ATC blade connectors plug into the fuse block, and alligator clip connectors are also included. It has a measuring range of 30 amps/48 VDC (10 seconds, max) with 100 mA resolution and (±2 percent + 2 digits) accuracy. Results are displayed on a 3.5-digit LCD with bargraph.

Features

  • 2-Percent + 2 Digits) Accuracy
  • Alligator Clip Connectors Included
  • Measuring Range: 30A/48VDC (10 seconds max)
  • 100mA Resolution

CE   1 Year

Categories: , Tags: ,

EXTECH AUT35 Universal 30A Current Tester

AUT 35 Meter AUT 35 Test Probe

Operating Instructions

1. Determine connection type: blades (7) or alligator clamps (8).
2. Connect the desired test cable to the meter’s banana jack connector cable (6), red to red, black to black.
3. Turn the vehicle ignition OFF.
4. If testing through the vehicle fuse box: a. Remove the fuse for the circuit under test; b. Plug the blade (7) into the fuse box (where the fuse was removed); and c. Insert the removed fuse into the fuse jack on the measurement cable (9).
5. If using alligator clamps connect the black clamp onto a good ground and connect red clamp to the positive test point.
6. Before continuing please note that tests should be limited to a 10 second period. Longer tests could damage the meter.
7. Press the meter’s Power button (5) to switch it ON.
8. Press the ZERO button (3) to zero the displayed reading.
9. Power the circuit under test up to 10 seconds only and read the LCD bargraph (1) and the display digits (2) for the measured DC current.
10. Use the HOLD button (4) to freeze the displayed reading.
11. When finished press Power to switch the meter OFF.
12. WARNING! The Fuse blades or Alligator clamp may become hot during testing. Allow to cool before removing. Do not test > 10 seconds.

 

Related Products