The MR59 is an affordable pinless meter for professionals in moisture remediation, pest control, home or building inspection, and floor installation. It is a high-quality, reliable, and easy-to-use moisture-detection tool. Wireless connectivity makes it easy to view readings on a mobile device from the FLIR Tools® Mobile app when the meter’s display is out of view.
Thanks to the ball-probe sensor, the user can cover a large area in a short time without making a mark; measure into corners, over uneven surfaces, and around baseboards; and detect problems below the surface. The MR59 is a reliable standalone meter—or a useful accessory to pair with a FLIR thermal imager.
-
LOCATE HIDDEN MOISTURE EFFICIENTLY
The ball-shaped sensor helps you quickly cover a large area – or into corners and around baseboards – without leaving a mark.
-
OPTIMIZE YOUR WORKFLOW
Use Bluetooth® to view readings from a mobile device.
-
INSPECT ANYWHERE WITH EASE
Take this durable, drop-tested meter to any job. Features a backlit display and bright worklight for dim light conditions.
Non-invasive pinless moisture measurements for wood and other building materials including plywood, drywall, oriented strand board (OSB), brick, cement screed, concrete, cement mortar, anhydrite screed, lime mortar, and plaster
FLIR MR59 Features:
- Bluetooth® data transmission
- Firmware upgrades via micro USB port located in battery compartment
- Maximum/Minimum readings
- High moisture Alarm audible alert
- LED Worklight
- Backlit LCD
- Data Hold
- Battery powered (1 x 9V battery)
- Automatic Power OFF after 30 minutes
FLIR MR59 Specifications:
| Measurement range | Moisture, 0 to 100 |
| Measurement accuracy | Relative measurements only |
| Measurement type | Capacitance ball sensor (non-invasive) |
| Measurement detection depth | Sensing depth for most common building materials |
| up to 4.0” (100mm), this may vary depending upon | |
| material under test. | |
| Response time | 0.5 seconds |
| Display | Backlit, multifunction LCD |
| Worklight | High intensity white LED |
| Auto Power OFF (APO) | After 30 minutes |
| Power supply | 9V battery (rear compartment) |
| Low battery indicator | (100% to empty) |
| Operating RH/Temperature | 90%, 32~86°F (0~30°C) |
| 75%, 86~104°F (30~40°C) | |
| 45%, 104~122°F (40~50°C) | |
| Housing material | Impact resistant plastic |
| Drop-proof | 2 metre |
| IP rating | IP40 |
| Safety Compliance | CE, RCM |
| Dimensions | 240.5 x 67 x 38mm |
| Weight | 245g |
