FLIR TA74
Universal Flex Current Probe Accessory
The FLIR TA74 Universal Flex Current Probe accessory is designed to add capabilities, simplify challenges, and get the best readings with your existing meter. Made with a narrow flexible coil clamp and locking mechanism, the TA74 lets you easily take measurements in tight or awkward spots — a difficult task with a traditional hard jaw clamp meter. The connection is a standard banana plug and the output is a voltage signal, so it’s compatible with most DMMs and clamp meters, regardless of brand. The TA74 has a max conductor diameter of 4.7 inches.
Take Accurate Measurements in Tight or Awkward Spots
- Snake the coil around obstacles with ease, even in deep, crowded cabinets
- Measure multiple conductors and targets with limited clearance
- Switchable AC current range – 30A, 300A, 3000A
Empower your Meter
- Compatible with most DMMs and clamp meters, regardless of brand
- Standard banana plug connectors fit most meters, and AC voltage output enables wide compatibility
- Adds 3000A AC current measurements to existing meters
- AC voltage output for wide compatibility
Easy Inspection and Navigation
- Bright, dual LED work lights provide built-in illumination for dark cabinets
- Portable, lightweight, and tangle-free without compromising measurement range
- Drop tested to 3 meters
| Model | TA72 | TA74 |
| Maximum AC current | 3000A | |
| AC current ranges and resolution |
30.00A, 300.0A, 3000A | |
| Basic AC current accuracy (full scale) |
± 3.0% + 5 digits | |
| Measurement rate | 1.5 samples per second, nominal | |
| AC current bandwidth | 45Hz – 500Hz (sine wave) | |
| Positional error (distance from optimum) |
0.6″ (15mm) ± 2.0% 1.0″ (25mm) ± 2.5% 1.4″ (35mm) ± 3.0% |
1.4″ (35mm) ± 1.0% 2.0″ (50mm) ± 1.5% 2.4″ (60mm) ± 2.0% |
| Meter Data | ||
| Minimum requirements for meter compatibility with TA72 |
AC voltage function, 4000 count display 1mV remote* | |
| Max conductor diameter | 2.4″ (6cm) | 4.7″ (12cm) |
| Flex coil length | 10″ (25cm) | 18″ (45cm) |
| Flex coil diameter | 0.3″ (7.5mm) | |
| Flex coil tip diameter | 0.5″ (13mm) | |
| Cable length | 73″ (1.9m) | |
| Worklight | Two white LEDs | |
| Power supply | (2) 1.5V “AAA” | |
| Drop test | 9.8′ (3m) | |
| Agency approvals | CE, UL | |
| Safety rating | CAT IV 600V, CAT III 1000V | |
| Standards | EN61010-1, EN61010-2-032, EN61326-1 | |
| Warranty | Limited lifetime with registration** | |
