Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Toner & Probe Kit
The IntelliTone Pro 200 LAN toner and Pro 200 probe let you locate, isolate, and validate twisted pair (UTP, Cat 5e, Cat 6), coax cables (RG6, RG59, and others for CATV/CCTV), bare wire (such as speaker wire and security network wire), and Cat 3 telephone cabling. The toner also lets you validate data services.
The toner and probe feature both digital and analogue toning and detection.
The digital IntelliTone tone is primarily used on data cables, and on active networks. In these environments, the digital signal eliminates cable misidentification due to signal bleed and radiated or ambient noise.
The analogue tone is primarily used on voice cables, and on bare wire. The SmartTone™ analog technology will change cadence when a pair is shorted at the far end. This makes exact pair identification easy and precise. The IntelliTone feature also lets you use the toner and probe to validate and troubleshoot wiring on RJ11 and RJ45 cables.
The toner detects Ethernet service and indicates active pair number on Ethernet circuits. The toner and probe also provide standard functions such as visual and audible signal strength indication, digital toning/detection, SmartTone analog toning/detection, and continuity testing.
Fluke Networks MT-8200-60-KIT
Includes:
- IntelliTone™ 200 LAN Toner and 200 Probe
- Coax F connector adapter
- (2) RJ11 and (2) RJ45 patch cables
- Test leads with alligator clips
- (2) Lanyards
- Quick start guide
- (2) 9-volt batteries
