The KYORITSU 2117R AC Digital Clamp Meter measures AC current in three ranges 60A / 600A and 1000A in TrueRMS mode with a resolution of 0.01A on the lowest 60A range. The ranges change automatically as the measured value changes. The tear-drop jaws can measure cable with a maximum diameter of 33mm.
In addition KYORITSU 2117R also has other measurement functions AC Volts, DC Volts, Resistance, Continuity as well as Non Contact Voltage Detection.The function selector knob allows you to operate the device with one hand.
KYORITSU 2117R AC Digital Clamp Meter Features:
• Fully Safety tear-drop 33mm jaw
• Ergonomic over-molded body gives convenient one-hand operation
• Large easy-to-read display with 0.01A resolution
• Accurate reading with True RMS – 60/600/1000A auto-ranging
• Non-Contact Voltage (NCV Detection.
• Long battery life
• Safety Standard – IEC 61010-1 CAT IV 300V / CAT III 600V
KYORITSU 2117R AC Digital Clamp Meter Specifications:
| AC A | 60.00/600.0/1000A (Auto-ranging) ±1.5%rdg±4dgt [45 – 65Hz] ±2.0%rdg±5dgt [40 – 1kHz] |
|---|---|
| AC V | 60.00/600.0V (Auto-ranging) ±1.0%rdg±2dgt [45 – 65Hz] (600V) ±1.5%rdg±4dgt [40 – 1kHz] (60/600V) |
| DC V | 60.00/600.0V (Auto-ranging) ±1.0%rdg±3dgt (60V) ±1.2%rdg±3dgt (600V) |
| Ω | 600.0Ω/6.000/60.00/600.0kΩ (Auto-ranging) ±1.0%rdg±5dgt (600Ω) ±2.0%rdg±3dgt (6/60/600kΩ) |
| Continuity buzzer | 600Ω(Buzzer sounds below 90Ω) |
| Conductor size | Ø33mm max. |
| Applicable standards | IEC 61010-1 CAT IV 300V, CAT III 600V Pollution degree 2 IEC 61010-031, IEC 61010-2-032, IEC 61010-2-033, IEC 61326-2-2(EMC), IEC 60529 IP 40, EN50581(RoHS) |
| Power source | R03/LR03 (AAA) (1.5V) × 2 |
| Continuous measuring time | Approx.170 hours (When R3 is used)(NCV_LED:off) (Auto power save : approx. 10 minutes) |
| Dimensions | 204(L) × 81(W) × 36(D)mm |
| Weight | 220g Approx. (including batteries) |
| Included Accessories | 7066A (Test leads) 9079 (Carrying case), R03 (AAA) × 2, Instruction Manual |
KYORITSU 2117R AC Digital Clamp Meter Standard Accessories:
