KYORITSU 5711 Non-Contact Voltage Detector (VoltStick)
- Audible buzzer & visual red LED indicates presence of AC voltage
- Auto check function for battery and internal circuit
- Dual sensitivity
Low(Lo) sensitivity helps to recognise the Phase from Neutral in sockets.
High(Hi) sensitivity for checking the presence of voltage from a further distance. - Self-function test
The 5711 performs self-function test when the button is pressed. If abnormality is found during the test, it gives 3 short beeps, 3 long beeps, 3 short beeps - Bright white LED light integrated into the tip
- Safety Standard – IEC 61010-1 CATIV W 600V / CATIII 1000V Pollution degree 2
The Kyoritsu 5711 is always ON = ready to use. This is a big safety advantage because you do not have to remember to switch it ON and it always indicates the dangerous presence of voltage.
Even though the Kyoritsu 5711 is always ON it does not affect the battery life due to it’s use of a special low power circuit. The battery life > 1 year (standby) .
*Always check the unit on a known live source before use
KYORITSU 5711 Non-Contact Voltage Detector Specifications:
| OPERATING VOLTAGE | AC 90 – 1000 V(Lo sensitivity) |
|---|---|
| AC 20 – 1000 V(Hi sensitivity) | |
| FREQUENCY RANGE | 50/60Hz |
| OPERATING TEMPERATURE | -10 – 50°C |
| STORAGE TEMPERATURE | -20 – 60°C |
| APPLICABLE STANDARDS | IEC 61010-1 CAT Ⅳ 600V / CAT Ⅲ 1000V |
| Pollution degree 2 | |
| POWER SOURCE | LR03 / R03(AA)(1.5V) × 2 |
| DIMENSIONS | 153(L) × φ20mm |
| WEIGHT | Approx. 40g (including batteries) |
| ACCESSORIES | LR03(AA) × 2, Instruction manual |
