The Reed R9200 Microwave Leakage Detector (also knowns as ST-2G model) detects the amount of leakage from the microwave oven. Any leakage up to 9.99 mW/cm at a distance of 2 inches from a microwave oven will be signaled by an audible “beeping” alarm and the value will be displayed. Reed R9200 (was ST-2G) comes with built-in memory maximum and minimum values functions and is a perfect tool for home inspectors.
How to use REED R9200 Digital Microwave Leakage Detector
With the REED R9200 turned on, adjust the meter to zero by pressing and holding the light/zero button. To measure the microwave leaking from microwave oven. Keep 2″ from the door seals or the front glass of the microwave oven. The values will display on the display. If you press the MAX button, the maximum value will be held on the display.
REED R9200 Specifications
- Measuring Range: 0 to 9.99 mW/cm2
- Accuracy: ±1mW/cm2
- Alarm Level: 5.0db
- Power Supply: Single 9V battery
- Dimensions: 190 x 60 x 42mm
- Weight: 151g
To measure the microwave leaking from microwave oven:
• Keep 2″ from the door seals or the front glass of the microwave oven
• The values will display on the display
• If you press the MAX button, the maximum value will be held on the display
REED R9200 Specifications
| Measuring Range | 0 to 9.99 mW/cm2 |
| Accuracy | ±1mW/cm2 |
| Resolution | 0.01 mW/cm2 |
| Operating Frequency | 2.4GHz |
| Display | 4-digit LCD |
| Backlit Display | Yes |
| Alarm | Audible (buzzer) and Visual (LED Light) |
| Alarm Limit | 5 mW/cm2 |
| Max Hold | Yes |
| Zero Button | Yes |
| Response Time | 2x per sec. |
| Power Supply | 9V battery |
| Low Battery Indicator | Yes |
| Product Certifications | CE |
| Operating Temperature | 0 to 50°C |
| Storage Temperature | -10 to 60°C |
| Operating Humidity Range | 10-90% |
| Dimensions | 160 x 60 x 42mm |
| Weight | 150g |
