The Tenmars TM-1017 clamp meter can measure AC current of up to 400A, and can measure AC and DC voltage, resistance, continuity and frequency. The TM-1017 can also measure active power, reactive power and apparent power, energy as well as power factor on single and three phase systems with a maximum conductor size of 30mm.
Phase sequence and rotation is also possible with the Tenmars TM-1017 and the user can also measure harmonics to 25th order with total harmonic distortion (THD). Information is presented on a digital LCD display with backlight and bargraph.
Maximum, minimum, and peak hold functions are standard on the Tenmars TM-1017 for capture of peak currents, or max/min readings. This is an autoranging meter, which removes the need to select the correct range when using a particular function as the TM-1017 does this automatically to suit the measurement.
The Tenmars TM-1017 is supplied complete in carry pouch with factory calibration certificate, user manual, battery and test leads.
| Specifications | |
| Maximum Current | 400 Amps |
| Display Counts | 10000 (Backlit LCD display) |
| Maximum Conductor Size | 30mm |
| AC Current Range | 0.1A to 400A, ±(1.0% of rdg + 3 dgts) |
| AC Voltage Range | 0.1V to 599.9V, ±(1.0% of rdg + 3 dgts) |
| DC Voltage Range | 0.1V to 599.9V, ±(1.0% of rdg + 3 dgts) |
| Resistance | 0.1 ohm to 1999 ohms ±(1.0% of rdg + 5 dgts) |
| Continuity Buzzer | Yes |
| Frequency | 40Hz to 399.9 Hz ±(0.5% of rdg + 1 dgt) |
| Bargraph | Yes |
| Autoranging | Yes |
| Auto Power Off | Yes |
| Peak Hold | Yes |
| Data Hold | Yes |
| Min/Max | Yes |
| Power Supply | 2 1.5V type ‘AAA’ batteries |
| Dimensions | 205mm (L) x 64mm (W) x 39MM (D) |
| Weight | 280g approx. including batteries |
