UNI-T UTD1102C Handheld 100MHz Digital Storage Oscilloscope
UTD1000 Oscilloscopes offers a user-friendly front panel with clear indications to allows access to all basic functions for easy operation. The scaling and position buttons for all channels are optimally arranged for direct view operation.
As design is based on the controls of traditional instruments, users can use the new units without spending considerable time in learning and familiarizing with operation. For faster adjustment to ease testing, there is an [AUTO] key to instantly display the appropriate waveform and range position. Apart from being extremely user-friendly, UTD1000 Oscilloscopes have the high performance indicators and superb functions required for speedy execution of measurement tasks.
The strong trigger and analytical functions make it easy to acquire and analyse waveforms, while the sharp and clear LCD and mathematics functions ensure clear observation and reliable analysis of signal conditions.
The performance features listed below will explain why the UTD1000 series can fully satisfy your testing and measurement requirements :
- Dual channels; vertical deflection width range : 5mV/div – 50V/div
- 100MHz Bandwidth
- Automatic waveform and status configuration
- Storage of waveforms, setups and interfaces; waveforms and setups reproduction
- Screen copy function
- Fine window extension; precise analysis of waveform details and overview
- Automatic measurement of 27 waveform parameters
- Cursor measurement function
- Unique waveform recording, storage and replay function
- USB interface that supports USB2.0
- High Definition colour 5.7 inch LCD panel at 320 x 240 pixel aspect ratio
- Multiple waveform mathematics functions (including add, subtract, multiply and divide)
- Multimeter function
- USB drive system software upgrade
- Built-in FFT
- Multiple waveform mathematics functions (including add, subtract, multiply and divide)
- Edge, video, pulse width, and alternate trigger functions
- Multilingual menu displays
- Help messages
UNI-T UTD1102C Specifications
Model | UTD1102C | ||
Bandwidth | 100MHz | ||
Channels | 2 | ||
Sampling rate | 500MS/s | ||
Rise time | ≤3.5ns | ||
Memory depth | 7.5kpts | ||
Vertical sensitivity | 5mV/div~50V/div | ||
Time base scale | 5ns/div-50s/div | ||
Storage modes | Setup, waveform, bitmap | ||
Trigger modes | Edge, pulse width, video and alternative | ||
Interfaces | USB host | ||
Multimeter Specifications | Range | Accuracy | |
DC voltage (V) | 600mV/6V/60V/600V/1000V | ±(1%+5) | |
AC voltage (V)(45Hz~400Hz) | 600mV/6V/60V/600V/700V | ±(1.2%+5), Frequency: <200Hz | |
±(1.5%+5), Frequency: ≥200Hz |
|||
DC current (A) | 6mA/60mA/600mA | ±(1.2%+5) | |
6A | ±(1.5%+5) | ||
AC current (A)(45Hz~400Hz) | 6mA/60mA/600mA | ±(2%+5) | |
6A | ±(2.5%+5) | ||
Resistance (Ω) | 6kΩ/60kΩ/600kΩ | ±(1.2%+5) | |
600Ω/6MΩ/60MΩ | ±(1.5%+5) | ||
Capacitance (F) | 6nF/6mF | ±(5%+10) | |
60nF/600nF/6μF/60μF/600μF | ±(4%+5) | ||
Display count | 6000 | ||
Auto range | √ | ||
General Characteristics | |||
Power | Li-ion battery: 7.4V 4400mAh; DC adapter: 100~240V 50/60Hz input, 9V/4A output | ||
Display | 5.7 inches TFT LCD, QVGA (320×240) | ||
Product net weight | 1.8kg | ||
Product colour | Red and grey | ||
Product size | 268mm x 168 mm x 60mm | ||
Standard accessories | Probe x2 (1x, 10x switchable), current voltage converter, power cord, adapter, test leads, PC software CD |
UTD1000C Series Handheld Digital Storage Oscilloscope Comparison
Model | UTD1062C | UTD1102C | UTD1202C |
Bandwidth | 60MHz | 100MHz | 200MHz |
Channels | 2 | ||
Sampling rate | 250MS/s | 500MS/s | 1GS/s |
Rise time | ≤5.8ns | ≤3.5ns | ≤1.8ns |
Memory depth | 7.5kpts | ||
Vertical sensitivity | 5mV/div~50V/div | ||
Time base scale | 5ns/div-50s/div | 2ns/div-50s/div |