KYORITSU 2033 AC/DC 300 Amp Clampmeter

Features

  • The smallest clampmeter in the Kyoritsu range capable of AC and DC current measurements.
  • 300 Amp auto ranging has minimum resolution of
    0.01A AC/DC.
  • Auto-zero function to allow one touch zero adjustment.
  • Included Accessories: Two (2) type LR44 1.5V Alkaline Batteries, Instruction Manual and Carrying Case.
SKU: KYORITSU 2033 Category: Tags: , , Brand:

 

KYORITSU 2033 AC/DC 300 Amp Clampmeter Specification:
AC Current

 

 0A to 40A
20A to 200A
200A to 300A		 50/60Hz ±1% of rdg ±4 dgts
±1.5% of rdg ±4 dgts
±3.5% of rdg
0A to 40A
20A to 200A
200A to 300A		 20Hz to 1kHz ±2.5% of rdg ±4 dgts
±2.5% of rdg ±4 dgts
±4.0% of rdg
DC Current 0A to 40A
20A to 200A
200A to 300A		 ±1% of rdg ±4 dgts
±1.5% of rdg ±4 dgts
±3.0% of rdg
Conductor Size 24mm maximum
Safety Standard IEC 61010-1 CAT III 300V
IEC 61010-2-032
Frequency Response DC, 20Hz to 1kHz
Withstand Voltage 3700V AC for 1 minute
Power Source Two (2) type ‘AA’ LR44 Alkaline 1.5V batteries
Dimensions 147mm (L) x 59mm (W) x 25mm (D)
Weight 100g approx.

 

Note : ◇During current measurement, keep the KYORITSU 2033 transformer jaws fully closed. Otherwise,accurate measurement cannot be made. The maximum measurable conductor size is approx. 24mm in diameter. ◇Unlike in DC current measurement, zero adjustment is not necessary in AC current measurement. There is no polarity in the reading either.

KYORITSU 2033 Sleep Function.

This is a function to prevent the instrument from being left powered on in order to conserve battery life. This function causes the instrument to go into the Sleep (powered-down) mode about 5 minutes after the last switch or button operation. To exit the Sleep mode, turn the Function Selector switch back to “OFF”, then to any other position, or press any button.

Related Products