Reed R8800 Current-Voltage Loop Calibrator

reed logo red

This Reed R8800 Current-Voltage Calibrator simulates a transducer or measure the current flow in a transducer loop. Reed R8800 can works in the source mode, calibrate meters, thermocouple indicators, data loggers, for signal injection, semiconductor characterization, or as a backing off source.

REED R8800 Features

  • Measure and calibrate current signals
  • Provides a precise current and DC mV source
  • Able to power or measure a 2-wire current loop
  • Drives loads up to 500Ω
  • LCD display with a maximum of 1999 counts
  • Includes test leads and battery

PDF   REED R8800 Instruction Manual

Authorised Australian Distrinutor

CE logo

1 Year Warranty

SKU: Reed R8800 Category: Tags: , ,

REED R8800 Specifications

  • SOURCE & MEASUREMENT
    Current Range: 0 to 19.99mA; 0 to 24mA
    Resolution: 0.01mA; 0.1mA
    Accuracy: ±(0.25% f.s. + 1 dgt.); ±(0.5% f.s. + 1 dgt.)
  • DC mV SOURCE
    Voltage Range: -199.9mV to +199.9mV
    Resolution: 0.1mV
  • Accuracy: ±(0.25% f.s. + 1 dgt.)
    GENERAL
    Display: LCD, max. 1999 counts
    Power Supply: Single 9V battery
    Dimensions: 150 x 70 x 40mm
    Weight: 232 g
    Sampling Time: Approx. 0.4 second
    Operating Temperature: 0 to 50°C (32 to 122°F)
    Operating Humidity: < 70% RH

REED R8800 Battery Replacement When the batteries become exhausted or drop below the operating voltage, “BAT” will appear in the left-hand side of the LCD display. 1. Disconnect the test leads from the meter. 2. Open the battery door by loosening the screw using a Phillips head screwdriver. 3. Insert the battery into battery holder, observing the correct polarity. 4. Put the battery door back in place. Secure with the two screws.

Related Products