Yokogawa MT10 Mini Manometer

Yokogawa_logo_sml

Compared to the conventional metal sensor, it has high reproducibility and long term stability of characteristics, thus ensuring highly stable measurement.

The MT10 is small and has a mass of about 700g. This makes it suitable for use at process industry sites, for diagnosing factory equipment and for various R & D applications.

Features

  • High reliability (with silicon resonant sensor).
  • Available in three models:
    265302 (130kPa)
    265303 (700 kPa)
    265304 (3000kPa)
  • Resolution 0.01kPa, 0.1kPa, 1kPa.
  • Data hold function.
  • Zero adjustment function.
  • RS-232C interface.
  • Supplied with: Carrying case, Battery installed, Monkey spanner, Single-ended wrench, Duct tape, and user’s manual

 

SKU: Yokogawa MT10 Categories: , Tags: ,

Yokogawa MT10 Mini Manometer

 Specifications 
Measurement Model 265302 Model 265303 Model 265304
Kind of Pressure Gauge pressure Gauge pressure Gauge pressure
Range
(Accuracy Guarantee Range)		 0 to 130kPa 0 to 700kPa 0 to 3000kPa
0 to 1.3256kgf/cm2 0 to 7.138kgf/cm2 0 to 30.59kgf/cm2
0 to 13256mmH2O

―――

―――
0 to 975.1mmHg 0 to 5250mmHg

―――
0 to 521.9 inH2O 0 to 2810 inH2O 0 to 12044 inH2O
0 to 38.39 inHg 0 to 206.7 inHg 0 to 885.9 inHg
0 to 18.85 psi 0 to 101.5 psi 0 to 435.1 psi
0 to 1300 mbar 0 to 7000 mbar 0 to 30.00 bar
Measurement Indication Range -2.5 to 110% of FS -2.5 to 110% of FS -2.5 to 110% of FS
Accuracy (Horizontally mounted, 23°C ±3°C, zero point adjusted) ±(0.04% of rdg
+0.03% of FS)		 ±0.1% of FS ±0.1% of FS
Resolution 0.01kPa 0.1kPa 1kPa
Maximum Allowable Input 500kPa 1000kPa 4500kPa
Internal Volume approx. 2cm3 approx. 2cm3 approx. 2cm3
Effect of Temperature ±0.02% of FE/10°C max. (Zero point)
±0.02% of FE/10°C max. (Span)
Effect of Mounting Direction ±0.1% of FS ±0.02% of FS ±0.01% of FS
Gas Leakage

10-5cm3/s max
Measurement Fluid

Gas only (non-flammable, non-explosive, non-toxic, non-corrosive)
Measurement Fluid Temperature 5°C to 50°C 5°C to 50°C 5°C to 50°C
Pressure Sensor

Silicon resonant sensor
Pressure Sensing Element

Diaphragm
Pressure Display Unit

kPa, kg/cm2, mmH2O, mmHg, inH2O, inHg, psi, mbar (bar)
Calibration Interval

1 year
Input Connection

Rc 1/4 or NPT 1/4
Material of Measurement Section

SUS316 stainless steel, Hastelloy C726
General Specifications
Display LCD display
Display Update Interval approx. 0.5 sec.
Response Time approx. 4 seconds (until the accuracy falls within the accuracy range)
Warm-up Time 1 minute maximum
Other Functions Comes with data hold function that holds indicated pressure value, and zero adjustment function.
Operating Temperature 5°C to 40°C; 20% to 80% RH or less (no condensation)
Power Supply 4 x 1.5 Volt Type ‘AA’ Alkaline batteries
Battery Life approx. 100 hours (continuous operation using alkaline batteries)
AC Adapter 100 to 120/220 to 240 Volts AC 50/60Hz (output 15V, 1.33A) (optional)
Communication Interface RS-232C Half-duplex transmission brain protocol. Transmission rate: 1200 bits/s
Insulation Resistance 500V DC/20MΩ or higher (between AC line and case) (when dedicated power kit is used).
Withstand Voltage 1500VAC/minute (between AC line and case) (when dedicated power kit is used).
Dimensions approx. 72mm (W) x 174mm (H) x 60mm (D) (excluding input connection section)
Weight approx. 700g (including battery

Related Products