Yokogawa MT220 Digital Manometer

Yokogawa_logo_sml

The MT220 can measure pressure with outstanding accuracy, high resolution, minimal tempco, and excellent stability. It offers a wealth of functions for field calibration, including transmitter output measurement (DCV/DCA functions), 24 Volts DC output, percentage error readout, measurement data memory, and Ni-Cd battery operation.

The D/A conversion output makes it simple to output data to a recorder or other equipment. And of course, data output through a GP-IB or RS-232 interface is also possible-including data output during operation on a 12 Volt DC power supply or Ni-Cd batteries.

Features

  • High accuracy: ±0.01%, with a maximum allowable input of 500kPa (130kPa range model).
  • Measurement with DC Volts and DC Amps.
  • 24 Volt DC output.
  • Percentage reading.
  • Error reading.
  • Measurement data memory.
  • D/A conversion output, comparator output, and external trigger input (Optional).
  • GP-IB or RS-232 interfaces.
  • 12 Volt DC power supply.
  • Battery operation (optional).
  • Std. Accessories: Connector for DC power supply, two rubber pads for rear foot, labels for indicating measurement object, one test lead, power cord and user’s manual.

 

SKU: Yokogawa MT220 Categories: , Tags: ,

Yokogawa MT220 Digital Manometer

Yokogawa MT220’s Silicon-resonant Sensor

Overall structural view of the Yokogawa original silicon resonant sensor*, a major factor in the high performance of the MT210/MT210F series.

Note*: Technology that has won the Ohkochi Grand Technology Prize and the Chairman’s Award of the Japan Federation of Economic Organizations (Keidanren).

MT220 Series General Specifications 
Display LCD display (with backlight) 5.5 digits or 4.5 digits for pressure measurement and 4.5 digits for measurement with AC Voltage or Current functions.
Warm-up Time approx. 5 minutes
Operating Temperature Ranges 5°C to 40°C; 20% to 80% RH or less (no condensation)
Storage Temperature -20°C to 60°C
Power Supply Three-way power: AC or DC supply, or optional Ni-Cd batteries.
AC Power Rating 100 to 120/200 to 240 Volts AC, at 50/60Hz
Allowable Supply Voltage Range 90 to 132V/180 to 264V AC
Allowable Supply Frequency 47Hz to 63Hz
DC Power Rating 10 Volts to 15 Volts DC
Battery Pack (Optional) Ni-Cd batteries: Last approx. 6 hours in continuous operation mode when fully charged (tested with backlight, DCV/DCA functions and 24V DC output turned on).
Battery charger: Built-in the MT220 main unit.
Recharge time: approx. 12 hours.
Power Consumption When in pressure measurement mode:
25VA max. for 100-V power line: 40VA max. for 200-V line.
When in recharge mode:
45VA max. for 100-V power line; 65VA max. for 200-V power line.
When in DC-powered operation: 10VA max.
Insulation resistance 20MΩ min. at 500V DC, between AC power supply and casing.
Withstand Voltage 1500V AC (50/60Hz) for 1 minute, between AC power supply and casing.
Dimensions Main Unit: approx. 132mm x 213mm x 350mm (excluding protrusions)
Battery Pack (Optional): 33mm x 182mm x 260mm (excluding protrusions)
Weight Main Unit: See the main specifications in Pressure Measurement section (PDF Datasheet).
Battery Pack: approx. 2.7kg

 

Related Products