The majority of electrical fatalities could have been prevented by the use of a properly installed Residual Current Device (RCD) , and regular testing to ensure they are working correctly.
RCD’s also protect against fire caused by faults in appliance, tools and wiring. If these faults go undetected they could cause a fire or personal injury. RCD’s provide a means of early fault detection.
SEW 8012EL Features:
● Menu-driven.
● Accurate digital readout of disconnection time.
● Over temperature protection.
● Over voltage protection.
● Fuse protection.
● Zero crossing circuitry permit testing at 0° or 180°.
●Extra large LCD(78 × 67mm).
● Very low consumption.
● 50Hz and 60Hz operation
● Auto power off.
● Auto off and off override.
● Wiring polarity indicator.
● Measure voltage between Line and Earth before testing.
●Frequency measurement indication.
SEW 8012EL Specifications:
Operating voltage (L-E) (50Hz or 60 Hz) |
Version A : 240 Vac Version B : 230 Vac Version C : 220 Vac Version D : 110 Vac |
|
Current settings | 3mA, 5mA, 10mA, 15mA, 20mA, 30mA, 50mA, 100mA, 150mA, 250mA, 300mA, 500mA. | |
Current selection | Rotary switch selector | |
Phase angle setting | 0° and 180° selectable | |
Wiring correctness indication | Yes (LEDs) | |
Trip indicator | Yes (LCD) | |
Over-temperature protection | Yes | |
Voltmeter (L-E) | 10Vac ~ 280Vac (50Hz or 60Hz) |
|
Timer resolution | 1ms (Max. Time=2.999s) | |
Timer accuracy | ±2ms | |
Current accuracy | ±5% ±1mA | |
Voltmeter resolution | 1Vac | |
Voltmeter accuracy | ±2%±1Vac | |
Operating temperature | -0°C ~ 40°C | |
Storage temperature | -10°C ~ 50°C | |
Dimensions | 221(L) × 110(W) × 57(D)mm | |
Weight (battery included) |
Approx. 695g | |
Power source | 1.5V (AA) × 6 (Alkaline battery) |
|
Safety standard | EN 61010-1 CAT III 300V EN 61326-1 |